21
Once the jambs are in position, fix through the middle pre-drilled holes holding them in place. Now you will need to drill holes through
the sheet using a 3mm drill bit to fix the jambs through the top and bottom as per diagrams below.
Please note: Use a 3mm bit to
drill holes from the inside of the
sheet through the pre-drilled
holes in the jambs to ensure
holes line up.
Then fix jambs from the outside
of sheet ensuring the jambs are
on the inside of the sheet.
Summary of Contents for Cyclonic Kit 3.0m Gable Series
Page 45: ...45...
