BOX CONTENT
PARTS
EN
EN
SAFETY
• This device should be used as described within the instructions
for use that accompany it.
• The device must be powered from a 5V USB port by using the
included USB-A to USB-C cable. Never try to connect the device
to other power sources.
• To protect against fi re, electric shock or personal injury, do not
immerse cord or device in water or other liquids.
• Unplug the USB cable when cleaning.
• Children of less than three years should be kept away unless
continuously supervised.
•
CAUTION
- The plastic bags and packaging used to wrap this
appliance may be dangerous. To avoid the risk of suff ocation,
keep these bags out of the reach of babies and children.
These bags are not toys.
Holder
1. Phone clamps
2. USB-C connector
3. LED indicator
4. Support
5. Socket
6. Fastening nut
Air vent mount
7. Clip
8. Support
9. Ball joint
Suction cup mount
10. Suction cup
11. Lever
12. Swivel knob
13. Extension knob
14. Ball joint
7.
4.
10.
2.
8.
6.
1.
11.
12.
13.
14.
3.
5.
9 .
Thank you for choosing the Pingi Solidgrip™ Pro NST-16EU phone mount and
wireless charger. Please always follow the safety instructions in this manual.
Keep this instruction manual in a safe place so that it is available at all times.
This product complies with regulatory, national and European requirements.
Never try to make technical modifi cations to this device. We do not accept
liability for accidents or damages resulting from failure to follow these
operating and safety instructions.
TECHNICAL SPECIFICATIONS
INPUT ............................................................................................................ 5V 2A/9V 1.67A
OUTPUT ........................................................................................................ 5V 1.5A/9V 1.2A
CHARGING EFFICIENCY ..................................................................................................±75%
OPERATING TEMPERATURE...................................................................................-20°C~45°C
Holder
Suction cup
mount
Air vent
mount
USB
Cable
Operating
instructions
6.
concept manual_charger_EN_R4.indd 2
concept manual_charger_EN_R4.indd 2
11-03-20(W11) 10:53
11-03-20(W11) 10:53
