background image

Home Automation Kit 
 

Limited support notice:  

Due to the diverse mix of networks, we are not able to offer support on routers, modems, switches or any 
other network/internet related devices or services.  

Our support for internet or network related features, that are not directly related to the product are limited.  

The following must be completed before calling our support team with network/internet related features:  

1.

 

Your network/internet must be configured and working 

2.

 

IP address and port number for the product must be pre- configured on the network 

3.

 

Also, have the following information available: default Gateway, Subnet mask, port numbers and all 
other network information 

 

Limited Warranty 

PIMA Electronic Systems Ltd. does not represent that its Product may not be compromised and/or 
circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to 
property resulting from burglary, robbery, fire or otherwise, or that the Product will in all cases provide 
adequate warning or protection. The User understands that a properly installed and maintained equipment 
may only reduce the risk of events such as burglary, robbery, and fire without warning, but it is not 
insurance or a guarantee that such will not occur or that there will be no death, personal damage and/or 
damage to property as a result. 

PIMA Electronic Systems Ltd. shall have no liability for any death, personal and/or bodily injury and/or 
damage to property or other loss whether direct, indirect, incidental, consequential or otherwise, based on a 
claim that the Product failed to function. 

This document may not be duplicated, circulated, altered, modified, translated, reduced to any form or 
otherwise changed unless PIMA’s prior written consent is granted. 

Copyright 

 2017 by PIMA Electronic Systems Ltd. All rights reserved. E&OE 

           

 

 
PIMA Electronic Systems Ltd.  

www.pima-alarms.com 

5 Hatzoref Street, Holon 5885633, Israel 
Tel: +972.3.6506414   Fax: +972.3.5500442 
Email[email protected] 
 
 
P/N: 4410455 



Revision: A, XX en, Feb 2017 
 

 

Summary of Contents for LCL-11A









Reviews: