PSSnet SLL
Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany
15
2.1.5
Dimensions
Figure 4: Dimensions of the PSSnet SLL
2.1.6
Installing the terminal block, start-up procedure
Warning!
Only connect a supply voltage that corresponds to the type plate of
your device.
Mount the terminal block for the supply voltage and the ground connec-
tion.
By connecting the voltage supply via the terminal block, you start the opera-
tion of the device.
2.1.7
Connecting the data lines
You can connect terminal devices and other segments at the ports of the de-
vice via twisted pair cables and F/O cables.
Install the data lines according to your requirements.
10/100 Mbit/s twisted pair connection
These connections are RJ45 sockets.
10/100 Mbit/s TP ports enable the connection of terminal devices or inde-
pendent network segments according to the IEEE 802.3 10BASE-T/
100BASE-TX standard.
These ports support:
X
Autonegotiation
