8
PSSnet SLL
Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany
LED or LASER components in compliance with IEC 60825-1 (2001):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
National and international safety regulations
Make sure that the electrical installation meets local or nationally
applicable safety regulations.
Note on the CE marking
The devices comply with the regulations contained in the following Euro-
pean directive(s):
2006/95/EG, 2004/108/EG
Directive of the European Parliament and the council for standardizing
the
regulations of member states with regard to electromagnetic
compatibility.
72/245/EWG, 2006/28/EG
Guideline for standardizing the regulations of member states relating to
radio interference from motor vehicles. Certified devices are marked with
an e1 type approval indicator.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the follow-
ing address:
Pilz GmbH & Co. KG
Felix Wankel Str. 2
73760 Ostfildern
Tel.: +49 711 3409 0
The product can be used in living areas (living area, place of business,
small business) and in industrial areas.
X
Interference immunity: EN 61000-6-2:2005
X
Emitted interference: EN 55022:2006 Class A
Warning
This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to
take appropriate measures.
The assembly guidelines provided in these instructions must be strictly
adhered to in order to observe the EMC threshold values.
