PSEN ma1.3b-24 VA
Operating Manual PSEN ma1.3b-24 VA
22227-EN-03
| 15
}
Alignment errors of the guard must not adversely affect the safety function of the guard.
}
The assured operating distance S
ao
and the assured release distance S
ar
must be tested
under real conditions.
}
Do not apply any installation tools (e.g. Pliers) on the surfaces of the switch.
}
Protect the safety switch from UV light or direct sunlight.
}
Any metallic parts (also accessories) must be connected to the equipotential bonding in
case of a risk of charging.
Installation of safety switch
Sensing face
Slide the switch through the hole in the
mounting surface with the sensing face to-
wards the actuator.
Attach the switch using 2 M12x1
hexagonal nuts.
Also note the max. torque setting (see
Technical details [
17]
).
Installation with actuator PSEN ma1.3-08/EX/VA
Sensing face
Slide the actuator through the hole in the
mounting surface with the sensing face to-
wards the safety switch.
Attach the actuator using 2 M12x1
hexagonal nuts.
Also note the max. torque setting (see
Technical details [
17]
).