List of figures
Operating Manual PMCtendo SZ
1002405-EN-04
87
List of figures
Fig. 1
PMCtendo SZ synchronous servo motors ...................................................................................
9
Fig. 2
Shielded connection of the power cable (graphic: icotek GmbH) ................................................
22
Fig. 3
PMCtendo SZ.3x – Turning ranges of the plug connectors.........................................................
25
Fig. 4
PMCtendo SZ.4x – SZ.8x – Turning ranges of the plug connectors ...........................................
26
Fig. 5
PMCtendo SZ.3x...K – Turning range of the plug connector.......................................................
32
Fig. 6
PMCtendo SZ.4x...K – SZ.7x...K – Turning range of the plug connector ....................................
33
Fig. 7
Forced ventilation unit.................................................................................................................. 36
Fig. 8
Holding brake – Switching behavior ............................................................................................ 48
Fig. 9
PTC thermistor curve (single thermistor) ..................................................................................... 50
Fig. 10 Derating depending on the surrounding temperature..................................................................
51
Fig. 11 Derating depending on the installation height..............................................................................
51
Fig. 12 PMCtendo SZ.3x – Dimensions................................................................................................... 58
Fig. 13 PMCtendo SZ.3x (HIPERFACE DSL) – Dimensions...................................................................
59
Fig. 14 PMCtendo SZ.4x – SZ.8x with convection cooling – Dimensions ...............................................
60
Fig. 15 PMCtendo SZ.4x – SZ.7x with convection cooling (HIPERFACE DSL) – Dimensions ...............
62
Fig. 16 PMCtendo SZ.4x – SZ.8x with forced ventilation unit – Dimensions...........................................
64
Fig. 17 PMCtendo SZ output shaft – Dimensions.................................................................................... 67
Fig. 18 SZ.3x – SZ.8x: Fax100 at speeds > 100 rpm ..............................................................................
69
Fig. 19 SZ.3x – SZ.5x: Frad100 at speeds > 100 rpm.............................................................................
69
Fig. 20 SZ.7x – SZ.8x: Frad100 at speeds > 100 rpm.............................................................................
70
Fig. 21 SZ.3x: FMk100 at speeds > 100 rpm .......................................................................................... 70
Fig. 22 SZ.4x: FMk100 at speeds > 100 rpm .......................................................................................... 71
Fig. 23 SZ.5x: FMk100 at speeds > 100 rpm .......................................................................................... 71
Fig. 24 SZ.7x: FMk100 at speeds > 100 rpm .......................................................................................... 72
Fig. 25 SZ.8x: FMk100 at speeds > 100 rpm .......................................................................................... 72
Fig. 26 Explanation of a torque/speed curve ........................................................................................... 73
