PSEN ma2.1p-34
Operating Manual PSEN ma2.1p-34
22192-EN-07
| 5
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Safety
Intended use
The safety function of the safety switch is:
}
Safe detection of the magnetic actuator within the response range
The safety switch is approved for use in potentially explosive atmospheres in accordance
with EN 60079‑0, EN 60079‑15, EN 60079‑18, EN 60079‑31.
Ex area Group II, Category 3G, Zone 2 (Gas): II 3G Ex mc nAc IIC T6 and Category 3D,
Zone 22 (dust): II 3D Ex mc tc IIIC T80°C.
The safety switch meets the requirements in accordance with:
}
EN 60947-5-3: PDDB only in connection
– with the actuator PSEN 2.1-10,
– the suitable evaluation devices (see
Requirements and connection to evaluation
devices [
11]
) and
– when used in series connections of the interface PSEN i1.
The safety switch is designed for applications in single or series connections.
In single connections the safety switch must only be operated with the following compon-
ents:
}
Actuator PSEN 2.1-10 and
}
a suitable evaluation device (see
Requirements and connection to evaluation
devices [
11]
).
In series connections the safety switch must only be operated with the following compon-
ents:
}
Actuator PSEN 2.1-10,
}
Interface PSEN i1 (see
Order reference [
20]
) and
}
a suitable evaluation device (see
Requirements and connection to evaluation
devices [
11]
).
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
}
Use of the product outside the technical details (see
Technical details [
17]
).
