Pilz 503220, Operating Manual

Page: 16 / 20

PSEN 2.2p-20
Operating Manual PSEN 2.2p-20
20915-EN-08
16
Electrical data
Switching voltage 24 V
Internal resistance 100 Ohm
Max. switching current, safety contacts 10 mA
Max. breaking capacity, safety contacts 0,3 W
Semiconductor outputs
Lowest operating current 1 mA
Times
Reaction time (actuator removed) 2 ms
Environmental data
Ambient temperature
Temperature range -25 - 70 °C
Climatic suitability
In accordance with the standard IEC 60068-2-30
Humidity 93 % r. h. at 40 °C
Max. operating height above sea level 2000 m
EMC EN 60947-5-3
Vibration
In accordance with the standard EN 60947-5-2
Frequency 10 - 55 Hz
Amplitude 1 mm
Shock stress
Acceleration 30g
Duration 11 ms
Airgap creepage
Pollution degree 3
Rated insulation voltage 25 V
Rated impulse withstand voltage 0,33 kV
Protection type
Housing IP65, IP67
Mechanical data
Actuator 1 PSEN 2.2-20
Typ. Hysteresis 6 mm
Operating distances
Assured operating distance Sao 8 mm
Min. operating distance Somin 0,5 mm
Typical operating distance So 0,5 mm
Assured release distance Sar 26 mm
Repetition accuracy switching distances 8 %
Min. distance between safety switches 25 mm
Sensor flush installation in accordance with EN
60947-5-2
Yes, follow installation guidelines
Connection type M8, 4-pin male connector
Material
Top PBT