12
4. Initialisation & Testing
This section will explain how the unit functions,
what the initialization procedure is and how to
test your device.
4.1 Initialisation
The initialisation process will occur every time
your Twin Channel Gas Alarm is powered on. The
green LED will illuminate, and the red LED will
flash every second alongside a beeping sound.
During this time the unit will check for attached
sensors and start the initialisation process.
The
initialisation process can take up to 8 minutes
,
however the beeping will be silenced after 30
seconds.
When a channel (sensor) has stabilised, there will
be one long beep and the red LED will stop
flashing. There will be one long beep for each
channel when that channel’s sensor has stabilised.