25
Number of register
2 bytes
Number of register
2 bytes
Byte
number
(2×
number of register)
1 byte
CRC check code
2 bytes
Data of the first register
Data of the second register
…………
CRC check code
2 bytes
8.6 Type of Register Instruction
UINT16
Unsigned 16-digit integer
INT16
Signed 16-digit integer
LUINT32
Unsigned 32-digit integer
LINT32
Signed 32-digit integer
WORD16
Bit denotation word, applicable to no-off and relay status
D0 means the first status channel or relay channel
D1 means the second status channel or relay channel
The rest bits may be deduced by analogy.
Bit 0 means “cut off”, and bit 1 means “ close on”
8.7 Calculation Factor
Because these is a limit of value, many of data registers of PMAC615 use the calculation
factor. It means that, if Users want to obtain the actual value, the value should be multiplied
by the corresponding calculation factor.
For example, the calculation factor of power factor register is 0.001. If the reading value is
Summary of Contents for PMAC615
Page 34: ...34 http www pmac com cn ...
