Pilot Communications Pitts Challenger, Manual, Page: 81 / 85

0- The main “A” frame is permanently mounted to the fuselage
1- Insert the lower wing and secure to the fuselage, along with the servo connections
2- Secure the struts to the lower wing, along with the servo connection. This is done by simply sliding
the quick release plate under the screws and tightening.
3- Attach the upper wing to both the “A” frame, and the other side of the strut, along with the servo
connection.
4- Attach the tension wires (permanently fixed at the centre points) to the upper and lower wings next
to the struts. Do so simply by sliding the quick release plates included over and under the screw heads,
and screw down to secure in place.
5- Secure the carbon tubes with the small rubber rings provided, as per the following pictures: