Pilot Communications Pitts Challenger, Manual, Page: 2 / 85

1- Introduction:
WELCOME TO THE PILOT-RC TEAM!
Thank you for choosing a Pilot-Rc plane as your next model. We hope that you enjoy many successful
and exhilarating flights with your new plane. Please read through these instructions before you start
building or flying to assure a successful experience, and welcome to Team Pilot-Rc!
YOUR MODEL:
Model:
Pitts Challenger
Wingspan:
87
″
(2,200mm)
Length:
84
″ (2,120mm)
Wing area: 2,265 “² (1,465 cm²)
Weight: 29.4lbs (13.4kg)
INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear
assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner
Due to the supports required for the top wing (A frame, wing struts and wire tensioners), Pilot-RC has
included a comprehensive accessories kit including quick release everything! To simplify
understanding what parts go where during the build process, these are numbered at the factory, and
their final location is as per the picture below: