21-) Underneath the stab, at
the rear section, notice the
small notch.
24-) Position the rudder onto the
fin by aligning the pre-installed
hinges and slide the steel wire
through all of the hinges as
shown.
23-) Position the stab by sliding
it into the inter-lock inside the
fuselage and secure it with two
40mm screws and washers. Once
positioned, glue the stab to the
fuselage, after final assembly
only.
22-) This notch will inter-lock
with the fuselage stab saddle
section.
-Bergfalke II-55 Glider-
7