41-) Once centered, secure
both of them using thick C.A.
Let cure.
44-) Install your rudder servo, plug
it into your receiver and center it.
Secure the rudder servo arm
assembly. Locate the pull-pull
cables. Two of the ball links are not
crimped on the cables. Remove
them and screw them to the rudder
arm as shown.
43-) On the other side, install
small nuts on the small screws
and secure them with thick
C.A.
42-) Drill two holes
(more/depending of your servo
arm choice) and insert some of
the supplied small screws.
-Bergfalke II-55 Glider-
12