57-) Prepare the spoiler servo by
attaching an appropriate servo
lead extension and securing with
a Grey safety clip. As for the
elevator, you will find a Red
string attached to the root rib
and near the servo cavity to
“fish-in” the servo lead
extensions.
60-) Slide the pushrod from the
bottom of the wing into the
front servo cavity. Attach one
end of the pushrod to the
center spoiler rib as shown.
59-) Prepare a 3 ¼’’ (82mm)
long pushrod and put one ball
link at each ends.
58-) Position the servo exactly
as shown and secure with servo
screws. A long screwdriver will
work fine to secure the screws
in place.
-Bergfalke II-55 Glider-
17