33-) Secure the stab to the
fuselage. Plug your elevator
servo in your receiver and
center it. Attach the supplied
elevator pushrod to the servo
arm. That pushrod as two ball-
links factory installed onto it.
36-) Carefully seek the small
cavity for the rudder pull-pull
cables on both sides of the
fuselage. Look at the picture
carefully for reference. Use a
knife to cut and remove the
covering.
35-) Completed elevator
assembly. Now, remove the
stab for the next step. Repeat
the process for the Right
elevator servo.
34-) Attach the other end of
the pushrods to the elevator
horn. Use the supplied key to
adjust the pushrod
mechanically.
-Bergfalke II-55 Glider-
10