Pilot Air SILENT K17SI, Instruction And Maintenance Manual

Page: 20 / 45

20 | P a g e Silent Series Rev 01 03-2020
11.Compressed Air Settings
Compressors in the SILENT1 series have 2 air outlets: 1 is a direct outlet and 1 consists of a valve
connected to a pressure reducer. It is therefore possible to connect the sump to the direct outlet or
use the valve to connect pneumatic tools. If the latter is the case, proceed as follows:
•
Set the required pressure by means of the pressure control knob (40.17) [fig.10-11]. Proceed as
follows: make sure the knob is free before turning; if that is not the case, pull up to release the
safety catch. Turn the control knob clockwise to increase output pressure or anti-clockwise to
reduce it. The operating pressure value is displayed on the pressure gauge B (40.18), while the
reading on the pressure gauge A (fig.40.19) indicates the pressure inside the sump.
•
Connect the hose from the pneumatic tool to the air outlet and open. After normal use, return the
control knob to the closed position and make sure that the sump is empty by unloading any
residual air from the valve.
Models in the SILENT2 and SILENT4 series only have a direct air outlet from the sump.
During operation, never:
•
Stand the compressor on sloping surfaces;
•
Cover the compressor or use in poorly ventilated environments;
•
Use the compressor in the rain or in severe weather conditions;
•
Remove the condensate blowdown plug;
•
Direct the jet of air towards people, animals or highly volatile materials (powders, thinners, etc...);
•
Carry out maintenance operations.