Start-up PikoLoad
Guideline Installation PikoLoad
Page 27 / 32
Version 1
4.5
Inbetriebnahme System
After a successful remote download test you can start-up your system.
We recommend to have the company card in the PikoLoad (if not in remote card mode the
company card stays in the PikoLoad). It is helpful to have the company card inserted in
PikoLoad until the install logs are done. This takes ca. 5-15 minutes depending on the
amount of data stored in the tachograph.
Please watch the LED display for “Double-Green”.
We recommend to plug in a USB-Stick after 10 minutes in the PikoLoad and to archive the
Installation data.
After start-up of PikoLoad you can start your bord computer system with or without
Remote card mode.
If you do a remote company card mode please remove the company card from PikoLoad.
Connect your system to the PikoLoad (RS 232 or CAN2).
Please note that the PikoLoad offers power supply and ignition at the CAN 2 connector for
bord computers.
