Start-up PikoLoad
Guideline Installation PikoLoad
Page 11 / 32
Version 1
4
Start-up PikoLoad
4.1
Lock data at the tachograph to the company
If the data are not yet locked to the company you have to do it now with a valid
company card.
Insert the company card in the slot of the tachograph and lock the data (see
description of your tachograph).
Remark:
The data must be locked to the company otherwise you will not get access to your
data.
4.2
Do a FMS test (only for vehicles with FMS interface)
This test is only possible by using a FMS-Test card. This card is part of the delivery
of the evaluation kit.
Figure 6: FMS-Test card
Insert the FMS-Test card in the PikoLoad and plug in a USB-Stick.
The test starts automatically and runs for 1 minute.
The result are stored on the USB-Stick in the directory “pikotest”.
The data format is ASC.
The description of the format can be found on www.fms-test.com.
Each file is stored with a consecutive number:
Figure 7: Example data FMS test
The logged data can be avaluated under www.fms-test.com (no fee). The evaluation
shows as well which data are available at the fms interface.
