T H E M O D E R N M - B U S T E C H N O L O G Y
PiiGAB Process Information i Göteborg AB
16
81
0M
.E
.1
.1
4
4.2
Finding the gateway and change IP address
Figure 4-2. Select what you wish to do
The next page (main menu) shows the different commands that can be made with
the M-Bus Wizard. Choose your option and click “Next.” If the gateway has not
been configured before choose
Change device IP Settings
and click “Next.”
Figure 4-3. Change IP settings
– select connection method
In this picture you are choosing the way you want to communicate to install the IP
address. If 810 is connected to the network choose the option on top and with a
serial connection pick the lower. In this part we are assuming that the gateway is
connected to the network. On the side of the gateway there is a label with the