T H E M O D E R N M - B U S T E C H N O L O G Y
PiiGAB Process Information i Göteborg AB
13
81
0M
.E
.1
.1
4
3.2
Using M-Bus Wizard
By using the M-Bus Wizard you can set the IP address and all other important
parameters to be able to communicate with your M-Bus meter. The M-Bus Wizard
is described in chapter 4.
You can search for 810-units in your network through the Wizard. There is usually
an IP address positioned on the gateway and if the address is outside the
permitted IP address area this will be marked in red. If you still are having trouble
finding the gateway on the network you can search and configure the gateway
through the MAC address. You cannot find the gateway if it is connected to a sub
network.
3.3
Adjustments for TCP/UDP and port number
To adjust the TCP alternatively UDP the M-Bus Wizard is used, and it can be found
in chapter 4. Choose “Change Device Parameters” from the main menu and click
through to the site where you make your choice. At PiiGAB we recommend usage
of UDP if this is supported by the superior software. The reason for this is that the
M-Bus driver has complete control over how the questions and answers are being
sent.
The adjustment of the port number is made at the same place as the TCP/UDP in
the Wizard. The port number has to be the same as in the calling from the
superior software in order for contact to be established with the gateway.