CHAPTER 2. ANATOMY AND FUNCTIONS
8
6.
ENGAGE
- This footswitch turns the entire Ringmaster on and
off. When the engage light is turned off, the Ringmaster is true
bypassed.
7.
LFO RATE and DEPTH
- This is a low frequency oscillator
(LFO) which modulates the pitch of the sine wave carrier.
RATE
- This knob determines how fast the LFO modulates
the pitch of the sine wave carrier.
DEPTH
- This knob determines how much the LFO signal
modulates the pitch of the sine wave carrier.
8.
SOURCE and RING
SOURCE
- This knob determines the source of the internal
carrier signal.
Counterclockwise is a tunable sinewave, while
clockwise is the fundamental squarewave.
RING
- This knob determines the volume of the ring mod-
ulated signal (RING) voice. This is the multiplied signal.
9.
OUT and CLEAN
OUT
- This knob determines the master output volume of
all your blended voices.
CLEAN
- This knob determines the volume of your clean
signal voice.
10.
GAIN and TUNE
GAIN
- This knob determines the amount of gain of the
internal sine wave carrier. Turning this control up will add har-
monic distortion to the internal carrier, and increase the volume
of the RING voice.
TUNE
- This knob determines the tuning of the sine wave
carrier.
11.
FOLLOW
- This toggle turns on the FOLLOW feature in the
down position. When engaged, the sine wave carrier follows your
instruments pitch using the internal pitch tracking.
