CHAPTER 4. RINGMASTER AND MOTHERSHIP 2
13
ership 2 for some sweeping tones. Connect the Ringmaster CV OUT
jack to the Mothership 2 EXPRESSION jack and play with the RATE
and DEPTH knobs. With the Mothership 2 is in SYNC mode, sweep-
ing overtones are produced.
Random Tone
- The Ringmaster’s HOLD can be used as
a random tone generator for the Mothership 2. Connect the Ringmas-
ter CV OUT jack to the Mothership 2 EXPRESSION jack and play
with the SPEED and AMOUNT knobs.
Sync Sweep
- The Ringmaster’s HOLD and LFO circuits
can be used to create moving overtones when the Mothership 2 is in
SYNC mode. Connect the Ringmaster CV OUT jack to the Mother-
ship 2 EXPRESSION jack and play with the SPEED and AMOUNT
knobs.
External Carrier
- Connect your instrument into the Mothership 2
INPUT jack and take the Mothership 2 OUTPUT jack and connect it
to the Ringmaster CARRIER jack. Then take the SUB OUT jack and
connect it to the INPUT of the Ringmaster. This will produce a wide
range of sounds depending on the waveform sent by the Mothership
2, or if SYNC is engaged.
Bass Tone
- Swap the location of where the Mothership 2 SUB OUT
and OUTPUT jacks are going to the Ringmaster for the External Car-
rier setting for a deep bass tone.
FM Synthesis
- Use a TRS splitter to access the Ring of the CAR-
RIER jack on the Ringmaster and send the internal sine wave carrier
to the Mothership 2 EXPRESSION jack for FM synthesis (Frequency
Modulation).
