2. Plug a TRS (Stereo) cable into CARRIER. The signal on the
Tip will replace your instrument signal and multiply with the
internal sine wave carrier. The signal on the Ring is an output
for the internal sine wave carrier, this can be used as a sine wave
output that tracks the pitch of your instrument when FOLLOW
is on.
CV OUT
1. Plug a TS (Mono) cable into CV OUT. The Tip is now carry-
ing the summed CV signals of the Ringmasters FOLLOW pitch
tracking, LFO, and HOLD. These CV signals can be
sent to another pedal or system that interfaces with the Hz/V
CV standard, such as the Pigtronix Mothership 2.
4.
Ringmaster and Mothership 2
The Ringmaster is designed to interface with the Pigtronix Mothership
2. When combined, these two units provide the complete set of voices
from the first Mothership pedal with modulation and tracking per-
formance that go far beyond the capabilities of the original Pigtronix
Mothership Analog Synthesizer.
The Ringmaster can be used solely as a
CV modulation box
by send-
ing CV signals to the Mothership 2. Connect the Ringmaster CV OUT
jack to the Mothership 2 EXPRESSION jack. When the Ringmaster is
disengaged, the CV OUT jack is as well. This can be useful to control
when the Ringmaster sends CV modulation to the Mothership 2.
Pitch Modulation
- Use the Ringmaster’s LFO section with the Moth-
12
