12.
HOLD
- This is a random pitch generator for the
sine wave carrier.
SPEED
- This knob determines how fast the
HOLD modulates the pitch of the sine wave carrier.
AMOUNT
- This knob determines how much the SAM-
PLE + HOLD modulates the pitch of the sine wave carrier.
13.
TREM
This toggle turns on the low frequency mode of the
sine wave carrier in the down position.
When engaged, the
TREM mode causes the ring modulator to sound like a tremolo
effect. When TREM is combined with the FOLLOW function,
the Ringmaster’s internal pitch tracking changes the tremolo
speed in response to your instruments pitch.
3.
Getting Started
3.1
Basic Hook Up
1. Unpack your Ringmaster and place it on a flat, stable surface.
2.
Make sure you are using the 18-Volt DC (negative center)
power supply that came with your Pigtronix Ringmaster.
3. Plug the power cord into the 18VDC jack on the back of the
Ringmaster and then plug the power adapter into an electrical
socket.
The Ringmaster is now powered up. To turn the device off, un-
plug it from the wall or turn off the power going to the 18VDC
supply.
We recommend that you do not leave your Ringmaster pow-
ered up for long periods of time when it is not in use
.
4. Plug your instrument into the INPUT jack and plug your ampli-
fier into the OUTPUT jack.
9
