13
12
EN
THANK YOU FOR PURCHASING A PIEPS DSP SPORT!
Register your unit at my.pieps.com and get:
• a warranty extension from 2 to 5 years!
FEATURES
• 3 antenna technology
• Big, circular receiving range for a quick and
stable signal detection
• Perfect signal processing, even in difficult
situations (multiple burials)
• Mark function
• Comprehensive self-check
• Easy to use group check
• Auto-Antenna-Switch
• Auto-Search-to-Send
• iPROBE support
PACKAGING
• 1x PIEPS DSP SPORT
• 3x Alkaline battery (in battery compartment)
• 1x PIEPS DSP SPORT carrying system
• 1x PIEPS hand loop
• 1x Quick Start Guide
• 1x PIEPS-Sticker
Check that the contents are complete and undamaged after unpacking. If necessary, contact
your point of sale or our support team.
FEATURES (SEE FIGURES)
STRUCTURE DEVICE
(1A) LCD display (backlight)
(1B) Slider OFF/SEND/SEARCH
(1C) Slider lock
(1D) Button MARK
(1F) Speaker
(1G) Transmit control LED
(1H) Battery compartment
STRUCTURE DISPLAY
(2A) Direction indication
(2B) Distance indication
(2C) Transmit symbol
(2D) Battery capacity
(2F) Active transmitting antenna
(2G) Number of burials (1-3)
(2H) Number of burials (4 or more)
(2J) Transmitter marked
CARRYING SYSTEM
PIEPS recommends using the included hardcase-carrying system (3A). In order to protect the
beacon’s display, carry the beacon with its display facing inwards (3B).
SWITCHING ON | SELF-CHECK | SEND MODE
Press the slider lock (1C) and move the slider (1B) upwards into the position SEARCH. Then
release the slider lock (1C) and move the slider (1B) downwards, until it locks in the position
SEND.
The display shows firmware version, battery capacity, self-check progress (4A), self-check
result (4B), group check countdown (4C) and finally the send display with the active transmit-
ting antenna (4D).
The device is now in send mode, the transmit control LED (1G) is blinking.
SEND
SEARCH
Press the slider lock (1C) and move the slider (1B) upwards in the position SEARCH.
SEARCH
SEND
Move the slider (1B) downwards, until it locks in the position SEND.
SEARCH MODE | SEARCH STRATEGY
SIGNAL SEARCH (5A)
Walk the search strip width in the search area quickly. The recommended search strip width for
the PIEPS DSP SPORT is 50 m. The display shows “no signal” (5A1).
COARSE SEARCH (5B)
As soon as a signal is received, follow the direction indication quickly and see if the distance
reading goes down. If the distance reading increases, change your direction by 180°.
• (5B1) go left
• (5B2) go straight ahead
• (5B3) go right
FINE SEARCH (5C)
The direction arrow disappears at a distance reading of 2 m. Look for the point of the lowest
distance reading. Work slowly and on the surface of the snow.
PINPOINTING (5D)
Check the search result by systematic probing. On a hit, leave the probe stuck.
MULTIPLE BURIAL (5E)
A multiple burial is indicated clearly on the display by the number of small human figures (2G, 2H).
Marking is possible from a distance reading of 5 m. Press the MARK button (1D) briefly to “hide”
the localized transmitter. A successful flagging is confirmed by a frame around the human
figure (2J). The display then indicates the direction/distance to the next strongest signal inside
the receiving range.
