8
9
MAINTENANCE
9.1
Do not disassemble tool or battery pack. At conclusion of its useful life, remove battery pack from tool. With
out further disassembly, return battery pack intact for recycling and/or discard tool intact.
Disassembly and
reassembly may create an unsafe condition.
9.2
Do not adjust internal components.
This may cause an unsafe condition.
9.3
Use only mild soap for cleaning
. Other cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc.,
may damage plastic parts.
9.4
Always unplug charger before cleaning and when it is not in use.
Failure to do so may result in shock or fire.
10
OPERATION
10.1
WHEN OPERATING THE PICOTE SMART MIXER, USE BOTH HANDS.
Use of both hands will help prevent
dropping the tool which could cause damage to the tool or operator.
10.2
Do not place hand or finger in front of plungers while battery is attached.
This could result in injury to operator.
10.3
Do not use any attachments.
Use of attachments could cause personal injury or damage to tool.
10.4
Release trigger and wait for tool to stop before removing battery pack. Removal of battery pack or cartridges during
operation is prohibited.
This could cause damage to tool or personal injury.
10.5
WARNING: When not in use, turn speed control to its minimum setting and remove battery pack.
This prevents tool from
starting unintentionally.
10.6
Do not fix trigger in the
“
ON
”
position by any means (rubber band, tape, etc.).
This may result in an unsafe operating
condition.
10.7
Do not operate without pistons attached.
This will damage the cartridge and may be dangerous.
10.8
Use only with batteries of rated voltage and same type.
Higher voltages may create an electrical hazard. Other battery
types may fall from tool, creating a risk of personal injury.
SMART MIXER / GENERAL SAFETY RULES
