3
SAFETY INFORMATION
This section contains important safety information. Failure to comply
could result in serious injury or death.
Safety Symbols
Safety symbols are used throughout this manual to draw attention to potential hazards.
Personal Protective Equipment (PPE)
Always use Personal Protective Equipment when using the Smart Mixer 2.0 or Picote Brush Coating
TM
System, including suitable overalls / protective clothing & footwear and the following:
Always wear suitable eye protection when using the Smart Mixer 2.0 or Picote Brush
Coating
TM
System, to prevent coating resin or other dust from irritating your eyes.
Always wear suitable ear protection when using the Smart Mixer 2.0 or Picote Brush
Coating
TM
System to prevent any hearing loss.
Always wear suitable resin
-
resistant gloves when using the Smart Mixer 2.0 or Picote
Brush Coating
TM
System to prevent any skin irritations. Any open injuries or skin irrita-
tions should be covered at all times to avoid contact with resin or dust.
Always wear a suitable ventilation mask when using the Smart Mixer 2.0 or Picote
Brush Coating
TM
System to prevent any resin dust or vapours being inhaled or con-
sumed, which can cause occupational asthma or epoxy dermatitis as well as eye irrita-
tion.
Dust produced when working can be dangerous to your health, inflammable or explosive.
Make sure the drain pipe has been
opened
and
ventilated
to stop any gases forming in
the lateral drain where the work takes place.
Before assembly, use, replacement of parts or maintenance, unplug the Picote milling
machine from its power socket.
Failure to comply may lead to serious injury including
electric shock or injury from moving parts.
Danger
risk of serious injury, follow instructions.
Always remember
