PICOBREW Z SERIES
Z KItS | 24
Brewing Z Kits
Make sure your equipment is clean, then follow the steps
below to get started brewing a Z Kit:
01.
From the main menu of your Z, select ‘PicoPaks & Z Kits’
and then ‘Z Kits. Select the name of the Z Kit from the list.
Alternatively, you can select ‘Recipe ID’ and enter the 4
digit RID code found on the external Z Kit box followed by
the Check Mark. Select ‘Start’.
02.
Ensure Step Filter Keyhole Plug is installed.
03.
Place the Bottom Mash Screen into the mash
compartment. Press down firmly so that it rests level on
the bottom ledge of the Step Filter with no gaps. Pour
grain into the mash compartment on top of the Bottom
Mash Screen.
04.
Level the grain with your hand. Do not compact. Place
the Top Mash Screen on the top ledge of the Step Filter
so it rests above the grain. Make sure that the groove in
the edge of the Top Mash Screen faces downward, fitted
onto the top of the divider that separates the mash and
adjunct compartments.
05.
Place the Adjunct Screen in the bottom of the Adjunct
Compartment of the Step Filter, resting on the bottom
ledge. Ensure that the semi-circular cutout matches up
with the Drain Tube indentation.
06.
Place measured Hops in appropriate Hop Cages. Secure
the Hop Cage Lids.
07.
Place each cage into the Adjunct Insert, with the longest
boiling hop going into the rightmost first compartment
(the one with the notch). Note that the order of cages is
reversed from that of Zymatic.
