PICOBREW Z SERIES
aSSEmBly | 16
Z POWER CABLE
If you purchased a 110V Z2-Z4, you will also receive an
additional box:
•
110V Z2 orders receive Box #4 - 110V Z3-4, Box #4a
•
These include a Power Distribution Cable to properly supply
power to multiple Z units.
Power Requirements of your Z
System
Each of your Z system units requires a dedicated 120V /
15A electrical circuit. For Z2-Z4 systems, the included Power
Distribution Cable provides power from a 240V/30A circuit
(L14-30 plug) to each Z system unit. Please ensure that your
electrical supply is sufficient and in compliance with local
electrical codes.
Important Electrical Safety
Information
•
Z power cables should always be plugged directly into an
outlet, never use an extension cord or power strip.
•
An adapter cannot be used to safely convert other styles
of outlets (such as 3 prong 240V) to NEMA L14-30. Failure
to use a correct power source is extremely dangerous and
could result in damage to your Z’s, property, and may cause
injury or death. Please consult with a licensed electrician if
you have any questions or concerns about the power being
used for your Z’s.
