35 |
P a g e
CHAPTER 7: DASHBOARD PAGE
Once the user successfully logs in, the dashboard page appears. In a new unconfigured unit,
the status page shows all preset information about the input and output states.
The top of the page contains the device information such as Cellular Network, Signal Strength, IP
Address and Date and Time. Navigation to the other pages is located at the left side of the UI
page. You can minimize the navigation panel by clicking the three parallel line icon beside it.
The dashboard also shows the status of the external devices connected to the FMGuard via
RS485-1 terminal (Modbus). It also shows the event logs located at the bottom of the page.
In a configured device, the status of all input and output channels are displayed in this page.
Any change in the input and output will automatically updated live.
Digital Input (X)
This table shows the tags under digital, its input description, value/state and the alarm state.
Input Description
These fields display what has been typed into the description field of digital input on IO
Configuration page.
Value/State
The field displays the status of each equipment connected to FMGuard, either open or
close.
