55 |
P a g e
Repeat Configuration
Authorized users can change the SMS alarm repeat settings sending the commands below. To
cancel repeat sending, any mobile phone from the operation or forward must acknowledge to
FMGuard by replying the acknowledge command (#ack).
Description
Format
Sample
Command
Remarks
Rights
Operation Authorized
Sets repeat
SMS frequency
#SET-SMS-RPT=n
#SET-SMS-RPTt=1
n=1,2,3,4,none, unlimited
✗
✓
Sets repeat
SMS time
interval
#SET-SMS-INT=n
#SET-SMS-INT=2
n=time in minutes
✗
✓
Read SMS
configuration
#RD-SMS
#RD-SMS
-
✓
✓
Acknowledge
all alarms
#ACK
#ACK
-
✓
✓
Set/Change
Digital Input
Status
#SET-X(n)-
OS=(openstate_name)
#SET-X-(di_name)-
OS=(openstate_name)
#SET-Y1-OS=OPEN
#SET-Y-Light-
OS=OPEN
n=digital output 1 to 8
do_name=digital output
description
OS=Open State
✗
✓
Acknowledge
specific digital
input alarm
#ACK-X(n)
#ACK-X1
n=digital input 1 to 8
✓
✓
analog input
alarm
#ACK-AI(n)
#ACK-AI1
n=analog input 1 to 4
✓
✓
Acknowledge
specific digital
output alarm
#ACk-Y(n)
#ACK-Y1
n=digital output 1 to 8
✓
✓
Acknowledge
specific digital
output alarm
#ACK-AO(n)
#ACK-AO1
n=analog output 1 to 4
✓
✓
Remote SMS command Benefits
With the remote command functionality above, it saves time and effort.
o
Re-assigning of operation personnel, a change of mobile phone number is also
common. Rather than having to physically go to the installation site with a
notebook computer, the authorized personnel can perform the change from
anywhere using their mobile phone. Where there are many installed sites this
becomes very efficient.
o
Remotely add, change or clear any setting of repeat time interval in REX
memory. Flexibility to change / clear the repeat SMS, once users are familiar with
the monitored site and wish to stop receiving repeat SMS. Or a new site that you
wish to receive the repeat SMS. All these controls are just as simple by using the
above remote command from anywhere using your mobile phone.
