manualshive.com logo in svg

pico Technology PicoScope 3425, User Manual

Share
Download
pico Technology PicoScope 3425 User Manual Download Page 39

Programmer's reference

35

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

3.2.8.15 ps3000_run_block

short ps3000_run_block (

short   handle,
long    no_of_samples,
short   timebase,
short   oversample, 
long  * time_indisposed_ms )

This function tells the oscilloscope to start collecting data in 

block mode

.

Applicability

Block mode

 only

Arguments

handle

, the handle of the required device.

no_of_samples

, the number of samples to return.

timebase

, a code between 0 and the maximum timebase

available (consult the driver header file). Timebase 0 gives the
maximum sample rate available, timebase 1 selects a sample rate
half as fast, timebase 2 is half as fast again and so on. For the
maximum sample rate, see the 

specifications

. Note that the

number of channels enabled may affect the availability of the
fastest timebases.

oversample

, the oversampling factor, a number between 1 and

256.  See 

Oversampling

 for details.

time_indisposed_ms,

 a pointer to the approximate time, in

milliseconds, over which the ADC will collect data. If a trigger is
set, it is the amount of time the ADC takes to collect a block of
data after a trigger event, calculated as sample interval x number
of points required. Note: The actual time may differ from
computer to computer, depending on how fast the computer can
respond to I/O requests.

Returns

0

 if one of the parameters is out of range

1 if successful

13

13

9

11

Summary of Contents for PicoScope 3425





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands