manualshive.com logo in svg

pico Technology PicoScope 3425, User Manual

Share
Download
pico Technology PicoScope 3425 User Manual Download Page 30

PicoScope 3425 PC Oscilloscope

26

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

3.2.8.9

ps3000_set_trigger2

short ps3000_set_trigger2 (

short handle,
short source,
short threshold,
short direction, 
float delay,
short auto_trigger_ms )

This function is used to enable or disable triggering and its parameters.  It has the
same behaviour as 

ps3000_set_trigger()

, except that the 

delay

 parameter is a

floating-point value.

Applicability

Triggering is available in 

block mode

 and 

fast streaming mode

 only.

Arguments

handle,

 the handle of the required device.

source,

 specifies where to look for a trigger.  Use

PS3000_CHANNEL_A (0), PS3000_CHANNEL_B (1),

PS3000_CHANNEL_C (2), PS3000_CHANNEL_D (3)

 or

PS3000_NONE (5)

.  

threshold,

 the threshold for the trigger event. This is scaled in

16-bit ADC counts at the currently selected range. If an external
trigger is enabled the range is fixed at ±20 V.

direction,

 use 

PS3000_RISING (0)

 or 

PS3000_FALLING

(1)

.

delay,

 specifies the delay, as a percentage of the requested

number of data points, between the trigger event and the start of
the block. It should be in the range -100% to +100%. Thus, 0%
means that the trigger event is at the first data value in the block,
and -50% means that it is in the middle of the block.  If you wish
to specify the delay as an integer, use 

ps3000_set_trigger()

instead.

auto_trigger_ms, 

the delay in milliseconds after which the

oscilloscope will collect samples if no trigger event occurs. If this
is set to zero the oscilloscope will wait for a trigger indefinitely.

Returns

0 if one of the parameters is out of range
1 if successful

25

56

15

25

Summary of Contents for PicoScope 3425





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands