manualshive.com logo in svg

pico Technology PicoScope 3425, User Manual

Share
Download
pico Technology PicoScope 3425 User Manual Download Page 31

Programmer's reference

27

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

3.2.8.10 ps3000SetAdvTriggerChannelProperties

short ps3000SetAdvTriggerChannelProperties(

short                        handle,
TRIGGER_CHANNEL_PROPERTIES * channelProperties,
short                        nChannelProperties,
long                         autoTriggerMilliseconds);

This function is used to enable or disable triggering and set its parameters.

Applicability

All modes

Arguments

handle, 

the handle of the required device.

channelProperties, 

a pointer to a

TRIGGER_CHANNEL_PROPERTIES 

structure describing the

requested properties. If NULL, triggering is switched off.

nChannelProperties, 

should be set to 1 if

channelProperties 

is non-null, otherwise 0.

autoTriggerMilliseconds, 

the time in milliseconds for which

the scope device will wait before collecting data if no trigger event
occurs.  If this is set to zero, the scope device will wait indefinitely
for a trigger.

Returns

0

 if unsuccessful, or if one or more of the arguments are out of

range

1

 if successful

Summary of Contents for PicoScope 3425





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands