PFAP550MS
Specifications
5
Rev. 05/03
Ph:800-421-6511
www.picomacom.com
550MHz Sub-Band Extended Agile Signal Processor
806MHz Sub-Band Extended Agile Signal Processor
PFAP550MS
POWER
IN/OUT
STORE
CH. MODE
CHANNEL
OUTPUT ADJUST
TEST POINT
-30 dB
AURAL
ADJUST
F+
F-
RF OUT
VIDEO IN
AUDIO IN
RF IN
IF IN
IF OUT
250 V
0.5A
AC117V
60Hz/38W
600W MAX
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE
HAZARD, USE ONLY WITH SAME TYPE 0.5A 125V FUSE
STAND BY
FUSE
SUB
CATV
Front View
Rear View
Input Frequency:
5.75-806 MHz
Input Channels:
CATV
T7 to 125 (HRC, IRC)
UHF
14-69
Output Frequency:
54-550 MHz
Output Channels:
CATV
2 to 78 (HRC, IRC)
Minimum Output:
57 dBmV min.
Input Level:
Min.
0 dBmV (For 55 dB min C/N)
Max.
25 dBmV
Output Adjust Range:
48-60 dBmV
AGC Range:
0 dBmV to +25 dBmV input
AGC Type:
Keyed sync tip
AGC Stability:
±0.5 dB
Noise Figure:
8 dB VHF, 10 dB UHF
Differential Gain:
<5% (10 to 90% APL)
Differential Phase:
<5° (10 to 90% APL)
Visual C/N:
Minimum 50 dB @ 0 dB input
Out-of-band C/N:
-65 dB
Frequency Response:
±1.7 dB
Selectivity:
-60 dB (Adjacent Channel)
Spurious Outputs:
In-band
>-60 dB
Out-band
>-60 dB
Aural Carrier Adjust Range:
12 dB
Return Loss: Input/Output:
12 dB typical
IF Output:
35 dBmV (45.75 MHz)
Controls:
Aural Carrier and Output Level
RF
Power Input:
105 to 130 VAC, 60 Hz, 15 W
Operating Temperature:
-10° C to 50° C
Dimensions:
19˝(L) x 9˝(D) x 1
3
/
4
˝(H)
Weight:
8.2 lbs.
Test Point:
-30 dB
NOTE: In stand-by mode, this unit is an agile 550 MHz
modulator
General
Ordering Information
PFAP550MS