PFAP550MS
Descriptions
The
Pico Macom PFAP550MS is a frequency agile, microprocessor-controlled,
professional re-broadcast grade, double-heterodyne signal processor that
converts one channel to another without the need to demodulate and remodulate the
signal. Front panel push-button controls enable input and output channel
selection. Sub-band capabilities allow the reprocessing of remote channel
origination for distribution over the entire cable system making it the ideal
signal processor in government and institutional environments. A rear-panel switch
enables sub-band channel operation. The unit uses state-of-the-art low noise PLL,
SAW filter, and AGC techniques to provide superior picture quality and reliability,
thereby dramatically improving customer satisfaction. The
PFAP550MS’s unique
sync tip detection AGC design delivers consistently high quality picture even at
extremely low input levels. Its high-selectivity SAW filtering enables the unit to
process any single cable channel, even in the most crowded systems. In the event
of power failure, the microprocessor’s non-volatile memory preserves input and
output channel identification guaranteeing proper reset when power is restored.
The
PFAP550MS’s high frequency and extremely high accuracy phase-locked-loop
oscillators enable the unit to meet the frequency offset and stability requirements
of FCC Docket 21006.
Pico Macom backs up this product with its industry leading
5-year limited warranty.
550MHz Sub-Band Extended Agile Signal Processor
PFAP550MS
132-Channel Input Range 5.75-806 MHz
(CATV T7-T13 and 2-125, TV 2-69)
82 Channel Output Range 54-550MHz
(CATV 2-78)
Back-panel switch enables sub-band operation
for reprocessing remote TV origination making it
even more flexible for institutional cable systems
Broadcast-quality specifications for unparalleled
picture quality
High 57dBmV output for optimum
carrier-to-noise performance
In-band carrier-to-noise ratio >50dB ensures
superior picture quality
Microprocessor control enables digital
push-button input and output channel
selection for ease of installation, configuration,
and servicing
Non-volatile memory for input and output channel
recall in the event of power failure
Front panel controls and test point enable easy
setup and monitoring
Double heterodyne conversion provides over
60dB spurious output and channel rejection for
interference-free adjacent channel operation
Auto-insertion of standby carrier with
audio-mute generator in the event of input signal
loss preserves system integrity
Sync tip detection AGC circuitry provides wide
dynamic range for robust system regulation
BTSC stereo compatibility for pass-through of
stereo signals
Composite audio-video IF loop provides
compatibility with encoders, ghost cancellers,
and video override applications
SAW filtered for superior adjacent channel
performance enables drop-in channel expansion
IRC and HRC input and output offset available
for frequency settings in systems using
offset channels
550MHz Sub-Band Extended Agile Signal Processor
4
Rev. 05/03
Ph:800-421-6511
www.picomacom.com