PICASO 3D Designer X, User Manual

Page: 22 / 68

DESIGNER XL MENU
21
Z offset adjustments
PH cleaning system calibration
Allows to verify the nozzle position and to adjust it relative to the nozzle cleaner.
Errors list
Displays 10 latest errors recorded by the 3D printer.
Update firmware
Starts the printer firmware update algorithm.
Filament drying
Starts filament drying algorithm displaying temperature and timing. Once drying
parameters are selected, the platform is moved to the middle position.
Reset errors
Clears the errors list.
Build plate position
Allows to move the printing platform (build plate) to one of the three positions:
upper (10 mm from the nozzle), middle (305 mm from the nozzle), transporting
(405 mm from the nozzle) and lower (600 mm from the nozzle).
Diagnostics
Configured by default. Use it in the event of lighting or blower systems failure and
only in compliance with instructions by technical support service.
Tapes checking
Alternately turns on the main colours of lighting: red, green, and blue.
Fans checking
Alternately starts the fans: model cooling, printhead cooling, chamber circulation, and
chamber cooling.
Set up tapes
Allows to select the main colors of lighting.
Ball screws movements check
Starts ball screws functional test algorithm moving the printing platform to the lower
position.
Ball screws sensors check
Displays connection status of ball screws sensors.
Value
Allows to adjust the initial position of the nozzle relative to the build plate in
the vertical plane.
Print the template
Starts the template printing with different values of z offset. Allows to set up
an optimal Z offset by selecting number of the best-printed template (selected