PICASO 3D Designer X, User Manual

Page: 50 / 68

PRINTER FIRMWARE UPDATE
11
49
The update algorithm is available in the software version 5.300
Before you start updating, unload the filament through the menu «Filament > Unload
filament». Make sure that all previously created material profiles (except standard ones)
are saved in the Polygon X window «Settings > Filament profile manager».
To update the 3D printer firmware, follow the instructions:
Download the actual firmware version from our website.
Format the USB stick (FAT32 file system, the recommended size is up to 16 GB).
Save the update file image.bin to the USB stick in the root folder.
Insert the USB stick into the USB-A port.
Select «Service > Update software» on the printer menu.
You are prompted to restore the default settings. Select «Yes».
After the software update is completed, the printer menu opens.
Select «Settings > Restore settings from file» on the printer menu. 3D printer restores
the previous settings.
The 3D printer saves the basic settings into a separate file on the USB stick and starts
updating the system. Make sure that operations «Cleaning ROM» and «Loading» pass
without interruption.
12
1.
2.
3.
4.
5.
6.
8.
9.
7.
11
The updating procedure may vary depending on the firmware version installed. The actual version of the
update instructions is available on the official website.
12 If operations «Cleaning ROM» or «Loading» ended prematurely or did not end, repeat the update
algorithm using another USB stick.