PIAGGIO Vespa GTS 300 HPE 2019, Owner'S Manual

Page: 72 / 104

CAUTION
DO NOT REST OR TRANSPORT OBJECTS AND/OR CLOTHING ON TOP OF THE
FRONT LIGHT ASSEMBLY WITH THE LIGHT ON OR JUST TURNED OFF. FAIL-
URE TO OBSERVE THIS PRECAUTION MAY CAUSE THE GLASS TO OVERHEAT
AND CONSEQUENTLY MELT.
03_29
03_30
Head light adjustment (03_29, 03_30)
Proceed as follows:
1 . Position the vehicle in running order and with the tyres inflated to the prescribed
pressure, onto a flat surface 10 m away from a half-lit white screen; ensure that the
longitudinal axis of the vehicle is perpendicular to the screen;
2 . Turn on the headlight and check that the boundary of the light beam projected onto
the screen is not higher than 9/10 or lower than 7/10 of the distance between the centre
of the headlight and the ground;
3 . Otherwise, adjust the right headlight with screw « A ».
N.B.
THE PROCEDURE DESCRIBED IS THAT ESTABLISHED BY EUROPEAN STAND-
ARDS FOR THE MAXIMUM AND MINIMUM HEIGHT OF THE LIGHT BEAM. RE-
FER TO THE STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
72
3 Maintenance