PIAGGIO MP3 LT 400 i.e., Instruction Manual

Page: 22 / 106

Take the red handgrip key and all the black keys supplied to an Authorised Piaggio
Service Centre .
The codes of keys not submitted for the new programming procedure are deleted from
the memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED, THE RED HANDGRIP KEY
(AS WELL AS THE OTHER KEYS) AND THE "CODE CARD" MUST ALSO BE
TRANSFERRED TO THE NEW OWNER.
Programming the immobilizer system
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
IZER system and/or for storing other key codes. The programming procedure should
be carried out with the engine stop switch set to « RUN ».
Procedure start - red key
Insert the red handgrip key in the switch key (in " OFF " position) and turn it to " ON ".
After 1 - 3 seconds, turn the key to « OFF » again and pull it out.
22
1 Vehicle