manualshive.com logo in svg

PIAGGIO MP3 LT 400 i.e., Instruction Manual

Share
Download
PIAGGIO MP3 LT 400 i.e. Instruction Manual Download Page 84

03_52

Rear-view mirrors (03_52)

The mirrors can be set to the desired position by adjusting the mirror frame.

Front and rear disc brake

The brake disc and pad wear is automatically compensated, therefore it has no effect
on the functioning of the front and rear brakes. For this reason it is not necessary to
adjust the brakes. An excessively elastic brake lever stroke may indicate the presence
of air in the braking circuit or a failure in the braking system. In this case, mainly due
to the importance of brakes to guarantee safe riding conditions, the vehicle should be
taken to an 

Authorised Service Centre or Dealer.

CAUTION

BRAKING SHOULD BEGIN AFTER ABOUT 1/3 OF THE BRAKE LEVER STROKE.

CAUTION

HAVE THE BRAKE PADS CHECKED BY THE DEALER ACCORDING TO THE
CHECKS SPECIFIED IN THE SCHEDULED MAINTENANCE TABLE. HOWEVER,
IN THE EVENT OF NOISES COMING FROM THE FRONT AND/OR REAR BRAK-

84

3 Maintenance

Summary of Contents for MP3 LT 400 i.e.











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands