manualshive.com logo in svg

PIAGGIO MP3 LT 400 i.e., Instruction Manual

Share
Download
PIAGGIO MP3 LT 400 i.e. Instruction Manual Download Page 68

03_20

03_21

Under normal climatic conditions, the brake fluid should be changed every 2 years.

This operation must be carried out by trained personnel; take your vehicle to an 

au-

thorised Service centre or Dealer.

WARNING

ONLY USE DOT 4-CLASSIFIED BRAKE FLUID. BRAKE CIRCUIT FLUID IS VERY
CORROSIVE; MAKE SURE THAT IT DOES NOT COME INTO CONTACT WITH
THE PAINTWORK

.

CAUTION

AVOID CONTACT OF BRAKE FLUID WITH EYES, SKIN, AND CLOTHING. IN
CASE OF CONTACT, RINSE WITH WATER. THE BRAKING CIRCUIT FLUID IS
HYGROSCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE SURROUNDING
AIR. IF THE HUMIDITY IN THE BRAKING FLUID EXCEEDS A CERTAIN VALUE,
IT WILL LEAD TO INEFFICIENT BRAKING. NEVER USE BRAKING FLUID KEPT
IN CONTAINERS THAT HAVE ALREADY BEEN OPENED, OR PARTIALLY USED.

Recommended products

AGIP BRAKE 4

Brake fluid

FMVSS DOT 4 Synthetic fluid

68

3 Maintenance

Summary of Contents for MP3 LT 400 i.e.











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands