PIAGGIO 2012 MSS APE 50, Service Station Manual

Page: 80 / 117

Remove the bearing using a section of tube.
Refit the bearing as shown in figure.
Specific tooling
038138Y Roller Casings Punch
Differential box overhaul
Inspect all components and replace damaged
parts
Clutch cover and thrust plate
Removal:
Undo the indicated screws.
Fitting:
In order to correctly position the thrust plate ac-
tuating pad, follow these steps: hold the clutch
lever full stroke, insert the actuating pad into its
housing and holding the actuating pad, slowly re-
lease the clutch lever, check that the references
on the clutch lever and on the cover are the same
as shown in the figure.
Engine
MSS APE 50
EN - 80