PIAGGIO 2012 MSS APE 50 Service Station Manual Download Page 70

Page: 70 / 117

Remove the oil from the engine.

Disconnect the negative cable from the battery and the starter motor cables.

Remove the fuel delivery line.

Remove the throttle grips, starter, etc.

Remove the axle shaft complete with hubs.

Remove the three fixing bolts (due at the front, and one at the rear) and remove the differential engine

unit of the chassis.

WARNING

WE RECOMMEND THE USE OF EYE PROTECTION WHEN USING CONTACT TOOLS.

WARNING

DO NOT REMOVE THE OIL COVER IMMEDIATELY AFTER AN ACTIVITY WITH THE ENGINE AT
FULL SPEED AND/OR WITH THE ENGINE RUNNING. THE HEATED OIL MAY LEAK, WITH THE
RISK OF BURNING

CAUTION

WHEN INSTALLING THE BATTERY, ATTACH THE POSITIVE LEAD FIRST AND THEN THE NEG-
ATIVE LEAD.

Engine from vehicle

MSS APE 50

EV - 70

Summary of Contents for 2012 MSS APE 50






















































































































Search results

Summary of Contents for 2012 MSS APE 50

Reviews:

Related manuals for 2012 MSS APE 50

Brands by name

Popular brands

PIAGGIO 2012 MSS APE 50, Service Station Manual

Search results

Summary of Contents for 2012 MSS APE 50

Reviews:

Related manuals for 2012 MSS APE 50

Brands by name

Popular brands