manualshive.com logo in svg

PIAB C 1200 Series, Troubleshooting Manual

Share
Download
PIAB C 1200 Series Troubleshooting Manual Download Page 54

VACUUM CONVEYORS

54

CLEANING OUT A PACKED CONVEYOR

There are many reasons why a conveyor can get overly full of material.  Most of the reasons have been

noted above.  The important factor is how to clean the conveyor out.  The easiest way to take apart the
conveyor is to remove clamps and remove the pump and filter assembly.  If there is not enough headroom,
start from the bottom and remove module by module.  

After removing the material from the main body of the conveyor, check to see if the material got past

the filter.  If it did, all of the parts above the filter should be cleaned out until there are no signs of the
material.  This includes any tubing and the air shock.  Make sure the valve on the air shock is cleaned off
and moves in and out easily.  Please refer to diagram below.  If the valve tends to stick, lubricate it.  If the
material is all the way up into the pump, please see page 23  for directions on how to clean out the pump.

Summary of Contents for C 1200 Series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands