PI V-273 VC, User Manual, Page: 22 / 53

5 Installation
18 Version: 1.1.4 MP155E V-273 VC Linear Actuator
NOTICE
Heating up of the V-273 during operation!
The heat produced during operation of the V-273 can affect your application.

Install the V-273 so that the application is not affected by the dissipated heat.

Ensure sufficient ventilation at the place of installation.

Make sure that the complete bottom side of the V-273 is in contact with the surface on
which the V-273 is mounted.
NOTICE
Attracting magnetizable objects!
The magnets in the V-273 can attract magnetizable parts, e.g., loose screws. Objects attracted
can damage the V-273.

Make sure that there are no movable, magnetizable objects within a radius of at least
10 cm around the V-273's housing.

Take appropriate precautions for storage and transport.
NOTICE
Damage to magnetically sensitive objects!
The magnets in the V-273 can damage parts susceptible to magnetic influences, e.g., magnetic
data carriers and electronic devices.

Make sure that there are no magnetically sensitive objects within a radius of at least 10 cm
around the V-273's housing.

Take appropriate precautions for storage and transport.
NOTICE
Damage due to collisions!
Collisions can damage the linear actuator, the load to be moved, and the surroundings.

Make sure that no collisions are possible between the linear actuator, the load to be
moved, and the surroundings in the motion range of the linear actuator.
NOTICE
Lubricants, dirt, condensation!
Dirt, oil, lubricants and condensation will render the motor/drive inoperable.

Keep the V-273 free from lubricants.

Keep the V-273 free from dirt and condensation.