5 Installation
P-616 NanoCube® XYZ Nanopositioner
PZ268D
Version: 1.1.0
25
Figure 12: The arrows show the position of
the 6 mounting screws of the
fiber holder.
Figure 13: The fixed fiber holder with 5 or 6 visible
mounting screws.
Requirements
You have read and understood the general notes on installation (p. 15).
The P-616 is
not
connected to the electronics.
Tools and accessories
Suitable fiber holder with the respective screws
Suitable Phillips-head screwdriver
Fixing the fiber holder
1.
Disassemble the XYZ platform from the P-616 using the screws shown in the figure at
the top left.
2.
Using suitable screws, fix the fiber holder to the six threaded holes, see the figure on
the top right.
Maximum torque: 0.3 Nm