2 Safety
P-2x5 Piezo Actuator
PZ245E
Version: 1.1.1
5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures ............................................................................................................... 6
2.1
Intended Use
The P-2x5 is a laboratory device as defined by DIN EN 61010-1. It is intended to be used in
interior spaces and in an environment which is free of dirt, oil and lubricants.
In accordance with its design, the P-2x5 is intended for the following applications:
Positioning of high loads; see "Specifications" (p. 41)
Dynamic positioning
Vibration damping
Force generation
The motion takes place in one axis.
The specifications of the P-2x5 apply to mounting with a vertically oriented motion axis.
Mounting with a horizontally oriented motion axis is not recommended.
The intended use of the P-2x5 is only possible in a completely mounted and connected state
and only in combination with suitable drive or control electronics (p. 12) available from PI. The
electronics is not included in the scope of delivery of the P-2x5.
The electronics must provide the required operating voltages. To ensure proper performance of
the position control, the electronics must also be able to read out and process the signals from
the position sensors.
2.2
General Safety Instructions
The P-2x5 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-2x5.
Use the P-2x5 for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-2x5.
2
Safety